webdyn.com
V1.0 subject to changes | Webdyn © by Flexitron Group
57
11.5
System Time
Select time zone of your location. To use local time, leave the check mark in the box next to Use local
time.
To adjust time by the system and refresh to get the time of the web, user can set to modify the time of
the system. They can change to adjust time by manual to achieve adjust time by the system if the
system fails to get NTP server.
NTP Client: Get the system time from NTP server.
Time Zone: Time zone options.
Summer Time (DST): Set it depends on users’ location.
Server IP/Name: IP address of NTP server, up to 32 characters. If blank, the system will find a server by
default.
11.6
Configure
Reset router settings: Click the Yes button to reset all configuration settings to their default values.
Then click the Apply Settings button.
NOTE
: Any settings you have saved will be lost when the default settings are restored. After restoring the
router is accessible under the default IP address 192.168.1.1 and the default password admin.
