M
aintenance Guide – Econordic heat pump
49
9.2 INVERTER PCB REASSEMBLY
STEP 4:
Remove the two screws (M4x8) in the upper
right corner and in the bottom left corner.
IMPORTANT:
Hold on to the PCB when you
remove the last screw, otherwise the
PCB may fall down.
STEP 5:
Remove the INVERTER PCB.
To remove the PCB
pull slightly on the
right side first .
STEP 1:
Place the INVERTER PCB in the
correct position.
To install the
INVERTER PCB, insert
slightly the left side
first. Use the pins to
center the PCB.
