M
aintenance Guide – Econordic heat pump
29
5.4.2 REAR PANEL REASSEMBLY
STEP 4 :
Pull the rear panel up slightly.
STEP 1 :
Insert the slits of the rear panel in
the right and left panels, then insert
the rear panel in the slot of the base
plate.
Do not hesitate to force
on the upper side of rear
panel to ensure no gap
between the base plate
and the rear panel.
STEP 2 :
Press strongly on the front and rear
panel at the same time to avoid a
gap between the parts.
Make sure there is no
gap remaining between
the parts.
RIGHT PANEL VIEW
