Flexim PIOX R500, Руководство по эксплуатации

Страница: 95 / 111

Annex
PIOX R721 A Menu structure
95
UMPIOX_R721V1-3EN, 2021-09-01
Annex
A Menu structure
Main menu
Parameters Start measurement Inputs Outputs Event trigger
Transducer Measurement
→ Configure inputs
→ Assign inputs
Enable Enable
Measuring point no. Source item Source item
Fluid
→ Refractometer
→ Analysis
→ Fluid properties
→ Event trigger
→ Miscellaneous
→ Refractive index
→ Refractometer
→ Analysis
→ Fluid properties
→ Miscellaneous
→ Refractive index
Scale
Fluid temp.
Output info Function
Select analysis quant.
Test signal Type
Volume fraction
Test mea. range Trigger value
OP analysis quantity
Hysteresis
Show range info
Glitch interval
Damping
Failure delay
Error value delay
Data logger Calibration Communication Miscellaneous
→ Configuration
→ Delete meas. values
→ Data logger info
→ Offset of the result
→ Scale offset
→ Network
→ Fieldbuses
→ System settings
→ Measurement settings
→ Units of measurement
→ Dialogs/Menus
→ Param. record memo.