Flexim FLUXUS G722ST-HT Скачать руководство пользователя страница 99

Страница: 99 / 175

9 Measurement

FLUXUS G722ST-HT

9.5 Display of parameters

UMFLUXUS_G722ST-HTV1-2EN, 2021-09-01

9.5

Display of parameters

The parameters can be displayed during the measurement.
• Press

during the measurement.

The following display appears:

The measurement is running in the background. The symbol

is displayed in the status indication.

• Select

Show parameters

in the scroll list.

• Press ENTER.
The program branch

Measurement

is displayed.

• Select another program branch to display the parameters.

Information regarding the data logger

Information regarding the data logger can be displayed during the measurement.
• Press

until the following is displayed:

If the ringbuffer is not activated, the time the data logger will be full in case all settings are kept is indicated in line 4.
If the ringbuffer is activated, line 4 indicates how long measurement data can be stored without losing older measurement

data.
The information regarding the data logger can also be displayed via the function

Show parameters

• Select the list item

Data logger info

in the menu item

Data logger

• Press ENTER.
The information regarding the data logger is displayed.

Fig. 9.4:

Scroll list in the program branch

Measurement

1 – status indication

Measurement\Show parameters

Notice!

The parameters cannot be changed during the measurement. When attempting to change the parameters, the

message

Read-only mode

will be displayed.

The measurement has to be stopped in order to change the parameters.

Fig. 9.5:

Information regarding the data logger

Special functions\Data logger

Содержание FLUXUS G722ST-HT
















































































































































































Результаты поиска

Содержание FLUXUS G722ST-HT

Отзывы:

Бренды по названию

Популярные бренды

Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Результаты поиска

Содержание FLUXUS G722ST-HT

Отзывы:

Бренды по названию

Популярные бренды