Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 86 / 175

9 Measurement
9.2 Measurement settings
FLUXUS G722ST-HT
2021-09-01, UMFLUXUS_G722ST-HTV1-2EN
86
Fluid pressure
The fluid pressure is used for the interpolation of the sound speed and the gas compressibility coefficient.
• Enter the fluid pressure.
• Press ENTER.
9.1.4 Other parameters
Extension cable
In case the transducer cable is extended (e.g., between junction box and transmitter), enter the length of the extension
cable.
• Select the menu item
Extension cable in the program branch Parameters .
• Enter the length of the extension cable.
• Press ENTER.
9.2 Measurement settings
• Select the program branch Options .
• Press ENTER.
• Select the menu item Measurement .
• Press ENTER.
9.2.1 Selection of the physical quantity
• Select the menu item Physical quantity .
• Press ENTER.
9.2.2 Selection of the unit of measurement
For the selected physical quantity (except sound speed), a scroll list with the available units of measurement is displayed.
The unit of measurement which was selected previously is displayed first.
• Select the unit of measurement of the physical quantity.
• Press ENTER.
Parameters\Fluid pressure
Parameters\Extension cable
Options
Measurement Units of measurement
Physical quantity Flow velocity
Unit of measurement Volumetric flow rate
Damping Mass flow rate
Dynamic damping
Error value delay
siehe Anhang A
Measurement\Measurement
Options\Measurement\Physical quantity
Options\Physical quantity\Volumetric flow rate
Notice!
If the physical quantity or the unit of measurement is changed, the settings of the outputs will have to be checked.