Flexim FLUXUS G722ST-HT, Руководство по эксплуатации

Страница: 131 / 175

16 Data logger
FLUXUS G722ST-HT 16.2 Deletion of the data logger
131
UMFLUXUS_G722ST-HTV1-2EN, 2021-09-01
Further parameters for storing
It can be defined whether the following parameters are to be stored together with the measured values.
• Select Yes to store the value. Select No in order not to store the value.
Acoustic signal during the storing
The storing of each measured value can be acoustically signalized. The signal can be activated or deactivated in the
menu item Beep on storage .
• Select On to activate the acoustic signal or Off to deactivate it.
• Press ENTER.
16.2 Deletion of the data logger
• Select the menu item Delete meas. values .
• Press ENTER.
• Select
Yes
or
No
.
• Press ENTER.
Tab. 16.1: Parameters for storing
display description of the parameters
Store totalizers values of the totalizers
Store diagnost. values diagnostic values
Store transd. temp. transducer temperature
Special functions\Data logger\Configuration\Beep on storage
Special functions\Data logger\Delete meas. values