manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 141 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 141

UMG70XV3-4EN 12.01.2009

141

15 Settings

15.2.2 Medium Pressure

The dependency of the properties of a medium on the pressure can be taken into ac-
count.
This display is indicated only if in 

SPECIAL FUNCTION\SYSTEM SETTINGS\MEASUR-

ING

 the 

GAS MEASURING

 has been deactivated. If 

GAS MEASURING

 is activated, the

medium pressure will always be requested in the program branch 

PARAMETER

.

15.2.3 Measuring Point Number

15.2.4 Transducer Distance

If 

ON

 is selected, the medium pressure will be requested in

the program branch 

PARAMETER

.

If 

OFF

 is selected, 1 bar will be used for all calculations.

Note!

It is reasonable for documentation purpose to enter the medium pres-
sure even if no pressure dependent characteristics are stored in the
flowmeter.

Select 

1234 

if the measuring point is to be identified only

by numbers, point and dash.
Select 



 if the measuring point is to be identified by

the ASCII editor.

recommended adjustment: 

USER

•

USER

 will be selected if the measuring point is always

the same.

•

AUTO

 can be selected if the measuring point often

changes.

In the program branch

 MEASURING

, the recommended

transducer distance will be displayed in parentheses, fol-
lowed by the entered transducer distance if the recom-
mended and the entered transducer distance are not iden-
tical.
During transducer positioning in the program branch 

MEA-

SURING

• only the entered transducer distance will be displayed if

TRANSD.

 

DISTANCE\USER

 is selected and the recom-

mended and the entered transducer distances are iden-
tical

• only the recommended transducer distance will be dis-

played if 

TRANSD. DISTANCE\AUTO

 is selected.

Fluid pressure

off

>ON<

Meas. Point No.:

(1234)  >(



)<

Transd. Distance

auto

>USER<

Transd.Distance?

(50.8)

50.0 mm

Transd.Distance?

50.8

mm

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов