Flexim FLUXUS F808 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 171

Flexim FLUXUS F808 Скачать руководство пользователя страница 79

8 Start-up

FLUXUS F808

8.1 Start-up settings

79

UMFLUXUS_F808V2-2EN, 2020-06-25

8.1

Start-up settings

When starting up the transmitter for the first time, the following settings are required:
• language
• units of measurement
• date/time
These displays will only be indicated once when the transmitter is switched on for the first time.

The available transmitter languages are displayed.
• Select a language.
• Press ENTER.
The menus are displayed in the selected language.

• Select

metric

or

imperial

.

• Press ENTER.

• Select

yes

if the transmitter is to be used in the region of Canada.

• Press ENTER.
This display will only be indicated if

imperial

is selected.

The current time is displayed.
• Press ENTER to confirm the time or to set the current time via the keys

and

.

• Press ENTER.

Warning!

Touching live parts

Electric shock or arc faults can led to severe injuries. The measuring instrument can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the transmitter

has to be disconnected from the power supply.

Caution!

Safety and accident prevention regulations for electrical systems and equipment

Failure to observe these regulations may lead to severe injury or death.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.

Notice!

The transmitter and transducers have to be checked to ensure proper condition and operational safety before each

use. The transmitter housing must always be closed during operation. Observe that maintenance work must be con

-

cluded.

Select language

Engineer. Units

CANADA-REGION

TIME

«
...
77
78
79
80
81
...
»

Содержание FLUXUS F808












































































































































































Отзывы:

Нет отзывов