Flexim FLUXUS F401, Руководство по эксплуатации

Страница: 92 / 160

14 Data logger
14.6 Information relating the data logger
FLUXUS F401
2020-06-12, UMFLUXUS_F401V2-1EN
92
14.6 Information relating the data logger
Aprox. 100 000 measurement data can be stored. Each measured value is stored with
the corresponding totalizer and optionally further measurement and diagnostic data, see
section 14.3.
According to the configuration of the data logger and the stored series of measured val
-
ues, the available data logger will be displayed in the menu item
Special Funct.\
Instrum. Inform.
• Select Special Funct.\Instrum. Inform.
• Press ENTER.
It is recommended to delete the old series of measured values before starting a mea
-
surement, see section 14.5.
The type and the serial number of the transmitter are displayed in the upper line.
The available data logger will be displayed in the lower line (here: 18 327 additional mea
-
sured values can be stored).
• Press key BRK twice to return to the main menu.
It is possible to store max. 100 series of measured values. The number of series of mea
-
sured values depends on the total number of measured values stored in the previous se -
ries of measured values.
It is possible to display the time at which the data logger will be full during the measure
-
ment.
Press key
to scroll through the display of the upper line.
If the ringbuffer is activated and has overflown at least once, the following display will be
indicated:
Special Funct.\Instrum. Inform.
Fig. 14.1: Information relating the data logger
F401 -xxxxxxxx
Free 18327
full= 26.01/07:39
54.5 m3/h
last= 26.01/07:39
54.5 m3/h