25
MODE
AUTOMATIC
LANGUAGE
ENGLISH
The display shows the language of the display.
Several languages are available such as :
Français, English, Deutsche , Espanol.
To change the language, press 3 seconds « OK », select the new
language with ▼ and ▲ then validate with « OK ».
The display shows the working mode of the heater.
For tests or checks, it is possible to simulate the functions : ON,
OFF, ventilation of the ambient thermostat, without acting on
thermostat. To select the mode, press 3 seconds on « OK » then
move with ▼ and ▲ then validate on « OK ». The system will go
back to the automatic mode after 5 minutes if the manual mode is
not used.
CC 0000 CS 0000
DB 0000 NC 0000
The control board diagnose the latest events on the heater:
CC - Number of Short cycles (Commissioning < to 3 minutes)
CS - Number of power failures
DB - Number of burner defaults
NC - Number of ignition cycles
SOFT VERSION
VB 0.1
The display shows the version of the software used.
To change the display, press ▲
To change the display, press ▲
GAS HEATER
SETTING
The displays allows gas heater settings. This part of the program
is strictly reserved to qualified person, trained to the product
specifications and qualified in gas combustion. For any settings,
refer to the chapter « Control board settings »
To change the display, press ▲
To change the display, press ▲
OK
RESET
OK
RESET
OK
RESET
OK
RESET
OK
RESET
