FLEXESERVE® | Quick Start Guide Flexeserve Zone® MK2 2 Tier, 3 Tier – Rear Feed | V1 JUN 2020 | 40002825
Page | 1 of 2
Flexeserve® Customer Support
[
t
] +44 (0) 1455 638300
[
e
!
Flexeserve Zone® MK2 2 Tier, 3 Tier – Rear Feed
For full details on how to operate this equipment
safely, please refer to the Operation manual.
WARNING
In an emergency, switch off the appliance and isolate
fully from the mains supply.
CAUTION
The surface of the zones will become hot, reaching
temperatures above 70°C.
Operation
Individual Zones – Settings
Each of the model variants are supplied with a mains isolator switch and an OLED interface controller. The
controls are located within the back OLED viewing panel at the base of the Flexeserve Zone
®
.
Set the mains isolator switch to the ‘I’ position to apply power to the equipment. Touch and hold the standby
icon and the display will show and scroll through the previously set settings. To initiate a recipe to an
individual zone, touch and hold the individual zone number icon to enter the recipe selection menu. Scroll
through the recipe selection menu using the up and down arrow icons to highlight the desired recipe. Select
the recipe by touching the pink ‘M’ icon and the recipe box will be highlighted. To initiate the recipe selection,
touch the tick icon. The selected zone will begin to heat and reach the pre-configured recipe temperature
automatically. The zone number icon will illuminate red whilst the zone reaches its recipe set temperature.
This will change to illuminate green to indicate that it has reached its set temperature. Repeat the above
process, selecting the ‘OFF’ setting in the recipe selection menu to switch zones off individually. To turn off all
zones, touch and hold the standby icon until the display reads ‘Standby’.
To view the recipe that is assigned to a particular zone, touch the relevant zone number icon for one
second. The display will then show the assigned recipe.
Arrow icons
Standby icon
Mains isolator
switch
I = On position
O = Off position
M ‘select’ icon
Zone number icon
OLED interface display
Tick icon
‘Back’ arrow icon
