FLENDER ZAPEX, Руководство по сборке и эксплуатации

Страница: 38 / 74

Assembly
5.4 Fill with lubricant
38 Edition 09/2022 M3560-02en
Coupling size
83 107 130 156 181 211 250 274 307 333 364 424
Grease filling
quantity
ZNN, ZNNA
dm
3
0.04 0.08 0.16 0.2 0.33 0.42 0.7 0.9 1.4 1.8 2.3 3.0
Grease filling
quantity
ZNZS, ZNZA
1)
dm
3
0.02 0.04 0.08 0.1 0.17 0.21 0.35 0.45 0.7 0.9 1.15 1.5
Table 5-3: Grease filling quantity
1)
For the ZNZS and ZNZA types, the grease filling quantities apply for one coupling side
5.4.3 Fill with lubricant
5.4 Fill with lubricant
NOTICE
Risk of injury and danger to the environment from lubricant
Collect spilled lubricant and dispose of it according to the valid regulations.
Procedure
1. Rotate the coupling until it reaches the position of the screw plugs (6) according to the il-
lustration.
2. Remove both screw plugs (6) located on the sides.
3. Measure the correct quantity of lubricant.
4. Fill the lubricant into one of the holes for the screw plugs (6). Use a grease gun for this, if
required.
5. Screw the screw plugs (6) with the underlaid/integrated sealing ring back in.
Figure 5-5: Fill with lubricant
① Filling hole
② Venting hole