Dreamer NX User Guide | www.flashforge.com
24
Chapter 5: Build Plate Leveling
A correctly leveled build plate is almost a guarantee for a high-quality 3D
object. When there are some troubles in printing process, firstly you
should check whether the build plate is leveled or not. NOTE: Make the
distance between the build plate and nozzle to be the thickness of a piece of
paper is often helpful. However, for printing high-precision objects (150 micron
and lower), please use a feeler gauge to level the build plate as it requires a
lesser gap between the nozzle and the build plate.
The Dreamer NX utilizes a three-point leveling system for its build plate. Under
the build plate, there is one spring-loaded nut in the front and two in the back.
Tightening the nut will create a bigger gap between the build plate and the
nozzle while loosening it will create lesser gap.
5-1
1.
（
5-1
）
From the main menu, tap
[Tool]
-
[Level]
. The extruder and the build
plate will begin to move to the starting position.
5-2
Содержание Dreamer NX
Страница 1: ...Dreamer NX User Guide www FlashForge com 2 FlashForge Dreamer NX 3D Printer User Guide...
Страница 26: ...Dreamer NX User Guide www flashforge com 27 5 5 5 5 5 Tap NEXT again and repeat the same leveling process...
Страница 32: ...Dreamer NX User Guide www flashforge com 33 Plane 6 5 Tube 6 6 Canister 6 7...
