Flash LED PAR 64 18x10W RGBW 4in1 IP65 OUTDOOR, Руководство пользователя, Страница: 3 / 5

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED PAR 64 18x10W RGBW 4in1 IP65 OUTDOOR. For safety reasons and to
ensure the trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of
accidental electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect
the device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
2.1 Specification

Power consumption: 256W

Power supply voltage: 95 - 240V

Voltage frequency: 50/60Hz

Diode type: 4in1

Number of diodes: 18

Diode power: 10W

Display: LED - 4 characters

Color: RGBW

Dimming: Linear: 0 - 100%

Number of DMX channels: 4/8

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: DMX, Master/Slave, Sound control, Auto mode

AC IN: dedicated IP65 power plug (Unischuko adapter included)

AC OUT: dedicated IP65 power plug

DMX IN: XLR - dedicated IP65 DMX plug (3-pin XLR adapter included)

DMX OUT: dedicated IP65 DMX plug

IP Rating: IP65

Housing made: Aluminium

Cooling: Passive

Height [cm]: 33

Width [cm]: 34

Depth [cm]: 24

Weight [kg]: 6,8

Weight with packaging [kg]: 10

Set includes: dedicated IP65 power plug to Unischuko adapter, dedicated IP65 DMX plug to
3-pin XLR (male) adapter