Flash F71000269, Руководство пользователя

Страница: 3 / 10

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED PAR 64 18x10W RGBW Aluminum Cast. For safety reasons and to ensure
the trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
3 PRODUCT INFORMATION
3.1 Specification

Power supply voltage: 110 - 240V

Voltage frequency: 50/60Hz

Diode type: 4in1

Number of diodes: 18

Display: LED - 4 characters

Color: RGBW

Dimming: Linear: 0 - 100%

Number of DMX channels: 4/8

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: DMX, Auto, Sound-controlled, Master / Slave

AC IN: integrated power cord

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin

Housing made: Aluminium

Cooling: Active

Height [cm]: 30

Width [cm]: 28

Depth [cm]: 25

Weight [kg]: 2

Weight with packaging [kg]: 2,4