www.flash-butrym.pl
4
6.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
1
2
3
1
2
3
GROUND
DMX +
DMX -
FEMALE
XLR
MALE
XLR
DMX Controller
DMX 512
DMX 512
6.2
Voltage specification
Input Voltage
Total Power
Frequency
110~240V
75W
50/60Hz
6.3
Connecting power supply
The connection is performed using power cable with IEC – C13 connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
7
OPERATION MANUAL
7.1
Control panel
The control panel is equipped with display and 4 control buttons with the following functions:
1.
MENU – choose option
2.
UP – edit parameter
3.
DOWN – edit parameter
4.
ENTER – confirm changes
