Flanders Scientific CM-170W, Руководство пользователя

Страница: 8 / 39

Function Menu
Function Menu Organization
Function Menu
The Function Menu allows you to assign user selectable functions to any of the 5 function buttons (F1, F2, F3,
F4, & F5) on the monitor keypad. Many monitor features listed as assignable options in the function menu are
also selectable via the embedded menus and are present simply to provide an option for faster, single button
press, access to the desired function. Other features listed require a Function Key for activation , but may have
associated customizable settings that can be found in other menus. To assign a function to a function key high-
light one of the 5 Function lines and press ENTER. A list of assignable functions will appear. Select the desired
function with the UP and DOWN buttons and press ENTER to assign that function to the corresponding Function
Key. The Function Display option listed under Function 5 gives you the option to have a temporary confirmation
window appear on screen after a function key is pressed that will ID the function that was turned On/Off. A re-
view of assignable functions is listed below.
Assignable Functions
Scopes & VU Meters 1, 2, 3
These functions toggle On/Off a Scopes & VU Meters profile. Three profile slots are available from the
Scopes & VU Meters Menu and each profile can bet set to a specific function key allowing you to instantly
toggle between various types of Scope and/or Audio Level Meter configurations. Please note that if you have
set both Scopes Windows to the Off position in the Scopes & VU Meters menu nothing will appear on screen
when you toggle this function. More information on Scope profiles can be found
here .
Cross Hatch
The Cross Hatch function toggles on/off the onscreen display of a graphical cross hatch overlay.
Blue Only
This function activates the monitor’s Blue Only mode.
Marker 1, 2, 3
These functions activate the onscreen display of the preset Area, Safety, Custom Graticules, or Active
Boundary Markers as set in the Marker Profiles. Marker presets can be customized via the
Marker menu. By
utilizing this function you can toggle on/off your selected markers with a single function key after setting up
your marker preferences in the Marker menu (see
Marker Menu section of this manual for more details).
Overscan
The Overscan function is selectable via an assignable function key. The Overscan function can work with 1:1
Pixel mapping mode On or Off. With 1:1 Pixel to Pixel mapping mode turned off the Overscanned image is
scaled full screen. With 1:1 Pixel to Pixel mapping mode turned on the image remains unscaled, but the area
lying outside of the Active Scan area is blacked out. This blacked out area represents the same area not visi-
ble with Pixel to Pixel mode off.
8
© 2012 Flanders Scientific, Inc.
*NOTE: Many features (Waveform,
Vector Scope, Audio Level Meters,
etc.) require a function key in order to
operate. Some menus (such as the
Scopes & VU Meters menu) only set
your display preferences while a cor-
responding function key must be as-
signed to turn the feature on and off.
If you are having trouble with a moni-
tor feature make sure you have as-
signed the proper function key and
any corresponding menu settings.
Back to Table of Contents
Main Menu
Function Function 1 Scopes & VU Meters 1
Scopes & VU-Meters Function 2 Scopes & VU Meters 2
Video Function 3 Scopes & VU Meters 3
Audio Function 4 Marker
Marker Function 5 Measurement
System Function Display On
Alarm
OSD
GPI
Display Alignment
System Status
Support
Function
*WARNING: Changing a function but-
ton assignment does NOT automati-
cally turn an active function off. Make
sure to disable unwanted active func-
tions before changing function button
assignments.