background image

STRA-04 Room controller. Installation and maintenance manual.

Fläkt Woods

8790 GB 2016.03

1

Specifications are subject of alteration without further notice.

Contents STRA-04 for Optivent

Installation instructions........................................................................2
Controller................................................................................................3
Display handling...................................................................................3
Technical data........................................................................................4
Configuration........................................................................................4
Operating modes..................................................................................6
Control...................................................................................................7
Condensation detector/Window contact/Frost protection.............8
Parameter settings................................................................................9
Function key........................................................................................11

Содержание STRA-04













Отзывы: