GPSBT560 User Manual
.
3
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
RF exposure warning ·
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users
and installers must be provide with antenna installation instructions and transmitter operating conditions
for satisfying RF exposure compliance.
CE
command
：
Bluetooth: ETSI EN 300 328 V1.6.1(2004-11); ETSI EN 301 489-1 V1.6.1(2005-09); ETSI EN 301 489-7
V1.2.1(2002-08)
GPS: ETSI EN 301 489-1 V1.6.1(2005-09); ETSI EN 301 489-19 V1.2.2(2002-11); ETSI EN 300 400-1
V1.3.1(2001-09); ETSI EN 300 440-2 V1.1.2(2004-07)
Safety: EN 60950-1:2006
