FK-Lightplanes FK 9 ELA, Руководство пользователя

Страница: 57 / 61

Airplane Manual FK 9 ELA FK Lightplanes
Revision 7 Handling, Serv.& Maint. page 8-6
8.10. Main / Subsidiary Structure
The main structure contains of:
1. fuselage structure (metal), tail unit structure, engine mount
2. landing gear (metal/carbon fibre composite)
3. control surfaces (metal)
4. main plane structure (metal/ carbon fibre composite)
Repairs at the main structure must only be performed by authorized
facilities!
The subsidiary structure contains of:
1. front fuselage covers / cowlings (glass fibre composite)
2. wheel pants (glass fibre composite)
3. spinner
4. inside cockpit: covers / consoles / floor
5. skin
8.11. Materials for minor repairs
Repairs at the subsidiary structure may be performed by the owner, however
it is recommended to consult the manufacturer or a certified repair center
before commencing the work.
Materials available for fuselage repair:
1.
Glass fibre layer „Köper“ 160g/sqm
2. Epoxy-resin
3. Covering Ceconite 102 + adhesives (i.e. Polytak) + common dope
4. 2-component acrylic paint
8.12. Special Repair and Check Procedures
Use common procedures applicable for aircraft build from metal, composite
and covering.
8.13. Required Tools
No special tools are required for normal maintenance.
8.14. Weighing
Weighing has to be performed according to the Weighing Form. Weighing
intervals according to applicable rules.