32
Check if the RTK signal display in the status bar is full, or if RTK Status in
Real-time Status is 4.
3.1.2 Adding New Guidance Line
After confirming the connection to the RTK, you can start setting points. You
can follow the prompts to complete setting points A and B to save a new
guidance line, and import the new guidance line to the current operation, as
follows:
Linear Mode
Step 1: Tap "New Guidance Line" in the home page to start the procedure
for creating a new guidance line.
Figure 3.3.4 Home Page
Or tap the sidebar "Guidance Line" to expand the guidance line details page,
and tap "Add" in the interface on the guidance line details page to start the
process of creating a new guidance line.
©FJ Dynamics Technology Co., Ltd. All rights reserved.
