Fitnex T70, Быстрый старт

Страница: 6 / 6

TENSIONING THE BELT
If when you plant your foot on the belt, you can feel a sliping
sensation then the belt has been stretched and is slipping over the roller.
This is normal and common adjustment on a new treadmill.
To eliminate this slipping, tighten both sides of the rear roller by turning a allen wrench
1/4 as shown above. Try the treadmill again to check for slipping.
Repeat if necessary, but NEVER TURN the roller bolt more than 1/4 turn at a time.
CAUTION:OVER TIGHTENING OF THE ROLLER WILL SEVERELY SHORTEN
THE LIFE OF THE BELT AND MAY CAUSE FURTHER DAMAGE TO OTHER
COMPONENTS.
Drive Belt
If you have tightened the running belt and are still experiencing a slipping sensation,
call your Steelflex Dealer. Tightening of the drive belt should only be performed
by an authorized dealer.
PAGE 5
T70
WARNING:
*Means of disconnect must be incorporated in the fixed wiring in accordance
with the wiring rules.