Fitness Quest 1400, Руководство пользователя

Страница: 11 / 30

10
STEP 8 – Install Monitor, Water
Bottle Holder and
Stationary Handlebar
Two people are required to do this step.
a) Remove 4 Phillips Bolts from the back of
the Monitor. Remove Cable Tie from top of
Stationary Handlebar Assembly. Connect
Monitor Pulse Wires to the Pulse Extension
Wires. Connect Monitor Extension Wire to
the Monitor. Attach the Monitor to the
Bracket on the Stationary Handlebar
Assembly with the Phillips Bolts you removed
at the beginning of this step and tighten
with Phillips Screwdriver provided.
b) Remove the Cable Tie from the bottom of
the Stationary Handlebar Assembly. Slide
the Water Bottle Holder over the bottom
end of the Stationary Handlebar Assembly
with the Cup Holder and the Handle facing
the same direction. While holding the
Stationary Handlebar Assembly over the
Frame Bracket, attach Upright Frame
Wire to the Monitor Extension Wire in
the Stationary Handlebar Assembly.
Then connect the Pulse Wires to the
Pulse Extension Wires. Slide the Stationary
Handlebar into the Frame Bracket (be
careful not to pinch any wires). Lift the
Water Bottle Holder up to expose holes,
attach with three Allen Bolts using 5mm
Allen Wrench provided.
8a
8b
stationary
handlebar
assembly
monitor
extension
wire
water bottle
holder
cup
holder
handle
monitor
monitor
pulse wires
pulse
extension
wires
pulse extension
wires
water bottle
holder
pulse wire
pulse wire
handle
4 - M5 x 10mm
phillips bolts
3 - M8 x 65mm
allen bolts
frame
bracket
tuck excess
wiring into
frame bracket
water bottle
holder
coiled pulse
wire
8c
boss
c) Tuck all excess Wires into the Frame
Bracket. Slowly lower the Water
Bottle Holder onto the Frame
Bracket (making sure not to pinch
Wires). The Bosses on the bottom of
the Water Bottle Holder insert into
the holes of the Upright Frame.
NOTE: Coiled section of Pulse Wire
is to be positioned outside
of the Water Bottle Holder.
monitor
extension
wire
upright
frame wire