Fissler souspreme multi pot, Руководство пользователя

Страница: 19 / 20

Indicator code Indicator code Reasons
E1 Broken circuit of the sensor
E2 Short circuit of the sensor
E3 Over heating
E4 Pressure switch malfunction
S/N Symptom Possible Reasons Solutions
1 Lid does not lock
The rubber gasket is not properly
installed
Reinstall the rubber gasket
The Floating Valve is seized by the
push rod
Push the rod with your hands
2
Cannot open
the lid after air
exhaust
The Floating Valve is still open Press the Floating Valve down
3
Air escapes from
the rim of the lid
rubber gasket was not installed Install the rubber gasket
Food residue on rubber gasket Clean the rubber gasket
Rubber gasket worn out Replace the rubber gasket
Lid not locked properly Rotate the lid fully
4
Air escapes from
the float valve
Food stuck on the rubber gasket of the
float valve
Clean the rubber gasket
The rubber gasket on the float valve
worn out
Replace the rubber gasket
5
The float will not
rise
Not enough food and water
Check recipe for proper
quantity
Air escaping from the rim of the lid and
the pressure limit valve
Call the Consumer Service
Center
When the following circumstances take place Solutions
Power cord and plug suffer from expansion,
deformation, discoloration, damages, etc.
Stop using the product immediately; contact Fissler
customer service.
A portion of power cord or the plug gets hotter
than usual.
Electric pressure cooker heats abnormally,
emitting a burnt smell.
Power cord and plug suffer from expansion,
deformation, disco- loration, damages, etc.
There is dust or dirt on the plug or socket. Remove dust or dirt with a dry brush.
Troubleshooting
Warning: Any other servicing should be performed by an authorized service