Fiso Nortech E-TEST-II, Руководство пользователя

Страница: 11 / 32

7
Cleaning Fiber Optic Connectors
The unit comes with an EasyClean tool. This high-performance device is designed to ease connector
ferule end faces cleaning. Read carefully the below instruction before using the device.
Important
The EasyClean is designed to clean the fiber optic connectors.
FISO is not liable for any damage caused in attempts to apply this device to other applications.
Always keep the protection cap on when not in use to avoid contamination
.
3.5.1 EasyClean Tool General Operation
The EasyClean cleaner is easy to use, but you need to be careful not to do the following:

Do not use this tool to clean oily connector, as this will cause contamination of the cleaning
cloth.

Do not touch the cleaning cloth as this will cause contamination.

Do not use this cleaner when the cloth is empty. This may cause damage to the connector.

Do not pull the cleaning cloth, use only the device body.

Do not attempt to dissemble as this can cause damage to the device and void the warranty.

Do not try to re-use the cleaning cloth as this will eliminate the cleaner’s effectiveness and void
the warranty.
The amount of cloth left in the tool is shown in the window located in the body.