F7000N Tip Alignment Device Guide
Rev. A – May 20
th
2015
Fisnar Inc. | 19C Chapin Rd. Ste. 307, Pine Brook, NJ 07058 | T: (973) 646-5044 | [email protected] |
www.fisnar.com
- Page 5 -
iii.
Hardware Installation
Shown above is the device connection to the robot work plate as well as a way to secure it to the robot
side. During installation, please try and correctly level the device as any offsets can affect the tip
correcting functionality.
iv.
Setting the Device
Step 1. Jog the dispensing tip to the middle of square
position as shown by the picture to the right.
In step 1, please try to move the tip as close to the surface
of the center as possible so that it could save searching
time.
Step 2:
Enter Setup Menu
→
Select “Tip Search Position” Function
on page 3/4.
