Fishman TONEDEQ | AFX, Руководство пользователя

Страница: 7 / 12

7
Front Panel (cont.)
Tone Controls
Low
•
Boost here to add depth and weight to the sound of the instrument.
Mid • Turn all the way left for a smooth “scooped out” tone at high volumes.
Raise the control to the right of center to add midrange “bite” to the sound.
High • Boost to cut through the mix. Cut to mellow and subdue the sound.
Low Cut • Adjust this control to affect the lowest frequencies that can cause
“rumble” or thumping sounds while you play.
Phase
The phase switch flips the polarity of your instrument signal from
positive to negative, changing its relationship to the sound
coming from the amplifier. One phase setting usually provides
better resistance to feedback than the other and will vary
depending on the instrument and playing environment.
Another approach to determining optimal phase is the selection which sounds
or feels most natural when playing. In certain playing environments the phase
switch may not have an audible impact.
The phase switch also affects the signal polarity to the balanced XLR D.I. and 1/4
inch outputs, synchronizing the amp output with other sound systems in use.
Boost
The boost foot switch increases the pedal’s overall output
level at the amp and D.I. output from 3dB to 9dB. When
activated, the LED above the foot switch will light steadily.
The amount of level increase is determined by the boost level
control on the pedal’s right side panel.