Fishman TONEDEQ | AFX, Руководство пользователя

Страница: 6 / 12

6
Front Panel
Volume
The volume control affects the 1/4 inch output level only.
For the cleanest signal, set the volume as high as possible
without clipping the next device in the signal chain. If you
hear distortion and the level light is not flashing red,
reduce the volume . For setting proper levels, refer to
input trim on page 5.
Compressor
The compressor uses a sophisticated leveling circuit to automatically reduce the
volume of loud sounds determined by your playing level and the setting of the
compressor control.
As you turn this knob clockwise, your overall playing
dynamics become increasingly limited, making softer
notes louder and controlling loud spikes in your
playing. This can be helpful in performances where
you desire a more even level to your playing. At its
maximum setting, there may be some overall
increase in the output level.
The active LED will light green to indicate that the
compressor is beginning to affect your dynamics. If the signal level continues
to increase to the point where 6dB of compression has occurred, the LED will
change to amber.
Battery Replacement
The batt indicator will light steadily when it is time to change the battery. Open
the battery door underneath the pedal and install a fresh 9V alkaline or lithium
battery. When the
batt
LED comes on you have approximately one hour of
remaining battery life. Approximate battery life is 12 hours using common
alkaline battery and 18 hours with a lithium battery.