Fishman TONEDEQ | AFX, Руководство пользователя

Страница: 4 / 12

4
Left Side Panel
9VDC
Power may be supplied by either a 9V battery (battery compartment
underneath the pedal) or the Fishman 910-R power adapter.
XLR D.I. Output
Connect a standard microphone cable here to feed recording equipment or a
sound reinforcement mixing console. When the 1/4” output is also connected,
this D.I. output’s ground is automatically lifted to prevent any unwanted ground
loops. This D.I. provides a fixed-level output, unaffected by the volume control.
D.I. Output Pre/Post
Choose between a true D.I. (pre EQ) or an effected XLR output (post EQ).
• Post is useful in live venues (especially if you are mixing from onstage)
where you want your “dialed-in” sound to come through the PA.
• Set this switch to the Pre position when you want a “flat” DI signal
going to the board and you wish to leave it to the sound-person or
recording engineer to dial up the instrument tone from their console.
Amp Output
Use a standard ¼-inch instrument cable to connect the amp output to your
amplifier, mixer or effects devices. You can also connect the
amp output
to an
unbalanced input on a recording system.