Fishman SA330x, Руководство пользователя

Страница: 10 / 16

10
Rear Panel Controls
19. Aux Input – Connect a line level stereo audio source such as a projector,
CD or MP3 player to this input. Both inputs may be used at the same
time. They are “stereo” (TRS) inputs, however the left and right signals are
mixed to mono.
20. Tweeter Level – Set the front panel controls flat (12 o’clock) and adjust
the tweeter level to where it sounds best to you.
21. Channel 1 & 2 D.I. Out (Pre-EQ) –
Use this output when you want
an unaffected, no-EQ, direct input signal to go to an additional mixer,
recorder or other such device. This pre-EQ output is always ground-
isolated to prevent ground loop hum.
22. Monitor In & Out – The monitor feature on the SA330x allows two
performers, each with an SA330x, to send their own mix to each other for
simplified on-stage monitoring.
Note: The Monitor In may also be used as additional audio input. The
Monitor Out can also serve as additional line level mix output. This output
is always ground isolated to prevent ground loop hum.
24. AC Power Switch & AC Power Inlet – Connect the supplied,
detachable AC power cable here and the other end to an AC mains power
outlet appropriate for your region.
25. Mute Foot Switch –
Plug a two-button, latching-type foot switch into
this jack to remotely mute the reverb or the channel mute. The channel
mute function duplicates and overrides the front panel Mute switch.
26. Accessory Port – Connect a compatible Fishman accessory here, such
as an SA Expand, for one-cable power and audio expansion.
27. Sub Out – The subwoofer output provides a dedicated, full-range audio
out intended for use with a powered Fishman SA Sub. This output sends
the proper level to the subwoofer and automatically activates a crossover
inside the SA330x power amplifier to provide optimal sound and power at
all output levels.
28. Mix D.I. (Post) – Plug in here when you wish to send signals from both
Input channels, the Aux input and an Accessory port device to a mixing
console. This post-EQ output is always ground isolated to prevent ground
loop hum.