Bass
This control affects the under-saddle pickup signal only!
A Boost here will add depth and weight to the sound the instrument.
Contour EQ
Two sliders (Contour and Frequency) make up this EQ. The Frequency slider lets
you tune in on the specific range of sounds that you can boost/cut with the Contour
(level) slider. The Contour control affects only the pickup and microphone signals at
the tip output.
With the Contour EQ you can boost or cut a wide range of frequencies, from gutsy
low midrange (250 Hz) to brilliant high treble (10 kHz). Often your instrument will
benefit from a slight midrange cut.
To cut mids, boost the Contour control and then sweep the Frequency control until
you find the band of frequencies that are brash and nasal sounding (usually around
the center of the Frequency slider's travel).
Then move the Contour slider below its detent to taste.
Treble
This control affects the under-saddle pickup signal only!
A boost here will help to "cut through the mix". Conversely, cutting the Treble will
mellow and subdue your amplified tone.
Blend Control
This control determines the balance between the two pickups. Move the slider left to
emphasize the Microphone (
A
). Move it right to hear more of the Pickup (
B
).
8
8
Prefix -
Prefix -
Stereo Blender
Stereo Blender
