background image

5

A word from Paul Beard

“In the world of resophonic guitar amplifi cation, we fi nally have resolution! The 

Fishman Nashville Series resophonic pickup is the result of new technology and 
innovative design. Use this pickup when playing with the Aura Imaging Pedal, 
select a microphone Image and turn it up. This new resonator pickup and Aura 

will make your microphone obsolete.”

A word from Bil VornDick

“We used Class A discreet mic preamps with vintage and artistically chosen 

microphones to create these Aura Images. The studio sounds that they conjure 

are accurate sonic representations of the instrument. I enjoyed working with 
Larry Fishman, the master who has invented this incredible technology, to create 
these Images. The calls and emails I have received, from everyday musicians to 
those that are household names, state their praise for the Aura and how it has 

helped their instrument whether in concert, a Grand Ole Opry broadcast, or a 
small night club. These Images were recorded with the benefi t of over 25 years of 
studio experience recording Jerry, and I have taken extreme care to help secure 
precise Images for your performances. I sincerely hope that you will enjoy using 

Aura.”

Содержание Aura



















Отзывы: