Thank you for your purchase of a FISHMAN product. Please read these instructions
carefully. If you have any questions or problems, contact our C
Cuussttoom
meerr S
Seerrvviiccee
D
Deeppaarrttm
meenntt aatt 997788--998888--99666655..
P
P
A
AR
RTTS
S
LL
IIS
STT
• FISHMAN ADT-100-S DRUM TRIGGER
• DOUBLE-SIDED ADHESIVE
• 1/4” JACK HOLDER
C
C
A
AU
UTTIIO
ON
N
The ADT-100S is a sophisticated state state-of-the-art sensing device from which you
can expect years of service. Note, however, that it is neither a microphone nor an ampli-
fying source. The signal provided by the trigger is a high-voltage fast-rising spike
whose level is proportional to the force of the hit it is sensing. Its function is to provide
a triggering signal to electronic sound sources, drum machines, midi converters, etc.
Unlike other triggers, the ADT-l00-S was designed mount primarily on the shell of an
acoustic drum, it also performs well when mounted on any vibrating surface including a
rim.
Although it will function as a head-mounted trigger, Fishman Transducers will not war-
ranty triggers used head-mounted due to the amount of potential misuse and abuse to
which head-mounted triggers are subjected. Try to avoid direct hits to the trigger and
don't pull on the cable when removing from the drum shell. This may cause damage to
the unit.
S
S
H
HEELLLL
M
M
O
OU
UN
NTTIIN
NG
G
Recommended location on the outside of the drum shell is approximately 1/2” below
the of the batter (top) head in an area that will not be subjected to bumps by other
drums or stands. It will function with equal results if mounted inside the drum shell with
the wire directed through the sound hole.
2
2
ADT-100-S Shell Mount Drum Trigger
ADT-100-S Shell Mount Drum Trigger
