Fisher RSS Скачать руководство пользователя страница 1

www.Fisher.com

Fisher

 RSS Lined Globe Valve

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Description

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Educational Services

2

. . . . . . . . . . . . . . . . . . . . . . . . .

Specifications

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Packing Maintenance

8

. . . . . . . . . . . . . . . . . . . . . . . . .

Replacing Packing and Bushing Inserts

8

. . . . . . . . . .

Trim Maintenance

11

. . . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly

11

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly

12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts Ordering

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts List

13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 1. Fisher RSS Valve with 667 Actuator
and FIELDVUE™ DVC6200 Digital Valve Controller

W9164‐2

Introduction

Scope of Manual

This instruction manual includes installation, maintenance, and parts information for NPS 1 through NPS 4 Fisher RSS
lined globe valves. Refer to separate manuals for instructions covering the actuator, positioner, and accessories.

Description

The RSS lined globe‐style valve (figure 1) has pure‐modified PTFE trim parts, push‐down‐to‐ close action, and positive
shutoff. This valve is intended for applications involving severely corrosive and toxic flowing media, and is well‐suited
for pure media applications, as well. The RSS valve body provides an economical alternative to alloy valve bodies in a
wide variety of applications.

Do not install, operate, or maintain an RSS valve without being fully trained and qualified in valve, actuator, and
accessory installation, operation, and maintenance. 

To avoid personal injury or property damage, it is important to

carefully read, understand, and follow all the contents of this manual, including all safety cautions and warnings.

 If you

have any questions about these instructions, contact your 

Emerson sales office

 or Local Business Partner before

proceeding.

Instruction Manual

D101299X012

RSS Valve

July 2017

Содержание RSS

















Отзывы: