Copyright
©
2005 Douglas Dynamics, L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any
printed, mechanical, electronic, film or other distribution and storage media, without the written consent of Fisher Engineering. Authorization
to photocopy items for internal or personal use by Fisher Engineering outlets or snowplow owner is granted.
Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment
when so altered without reference to illustrations or specifications used. Fisher Engineering and the vehicle manufacturer may require
and/or recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. Fisher Engineering offers a limited
warranty for all snowplows and accessories. See separately printed page for this important information. The following are registered (
®
) or
unregistered (™) trademarks of Douglas Dynamics, L.L.C.: EZ-V
®
, FISHER
®
, Minute Mount
®
, ProTube™, SnoFoil
®
.
Printed in U.S.A.
Lit. No. 28374, Rev. 01
October 1, 2005
8248
Atta
chm
ent
Arm
Push
pla
te
Jack Lever
Jack
Stand (Rai
sed)
Headgear
Connecting Pin
Withdrawn
Jack Coll
ar
Jack Leg
Jack St
and
Jack
Stand
Jack Lever
Conne
ctin
g
Pin
A.
1.
Place cab control in
"Lower/Float".
2.
Push
lift arm down.
3.
Pull jack
lever outward.
Jack
stand will adjust to
prope
r
height.
U.S
. Pa
tent
s
4,280
,062,
4,999
,935,
5,353,530,
5,4
20,
480
and
other
pate
nts
pend
ing
A.
1. Drive vehicle
forward fully
engaging pushpl
ates into
att achment arms.
B.
1. T
wist connecting
pin
to release
tension.
2. Remove
elec
trical
covers on
vehicle.
3.
Attach electrical conne
ctor to
correspo
nding con
nector on
vehicle.
4. Repeat step
s B 1-3 on
passenger side
of veh
icle.
5. Connect hydraul
ic hoses to
quick disconnect
s. (BEL
T
DRIVE ONL
Y)
C.
1.
Release carr
ying chai
n and
reatt
ach it lea
ving plenty of
slack.
2.
Push headgea
r upward
toward
vehicle until connec
ting pins
snap in
place.
3.
Pull jack
lever outward an
d
raise
the jack st
and.
MO
UN
TING
PLO
W
RE
MO
VIN
G PL
OW
B.
1. Disconn
ect
electrical
connector
and
reinser
t in protect
ive
cover
.
2.
Insert r
elease rod under jack
collar
.
3.
Push down on rele
ase rod as
you pu
ll and twist connecting
pin.
4.
Repeat S
tep
s B 1-3 on
passenger side.
5.
Disconnect hydraulic hose
couplings and
cover with
dust
plugs.
C.
1.
Remove slack from carrying
chain
and reatt
ach.
2. Back vehicle away
from plow
.
LOWER BLADE WHEN VEHICLE IS PARKED.
REMOVE BLADE ASSEMBLY BEFORE PLACING
VEHICLE ON HOIST.
DO NOT EXCEED GVWR OR GAWR INCLUDING BLADE
AND BALLAST.
READ OWNER'S MANUAL BEFORE OPERATING OR
SERVICING SNOWPLOW.
TRANSPORT SPEED SHOULD NOT EXCEED 45 MPH.
REDUCE SPEED UNDER ADVERSE TRAVEL
CONDITIONS.
PLOWING SPEED SHOULD NOT EXCEED 10 MPH.
SEE YOUR SALES OUTLET FOR APPLICATION
RECOMMENDATIONS.
59900
WARNING
CAUTION
A
CCESSORIES
Item
Part
Description
Item
Part
Description
90
28549 Universal Label Replacement Kit
98
22215 6'-9" Poly Cutting Edge (LD)
91
22400K 2 oz. Dielectric Grease Tube
22216 7-1/2' Poly Cutting Edge (LD)
92
26239 ProTube™ Bumper/Grille Guard – Stainless
5532
7-1/2' Steel Cutting Edge (RD)
26240 ProTube™ Bumper/Grille Guard – Black
5533
8' Steel Cutting Edge (HD)
93 26018-1 Mini Strobe Light
26460 8-1/2' Steel Cutting Edge (HD)
94
26019 Full-Size Strobe Light
5534
9’ Steel Cutting Edge (HD)
95 26020-1 Mini Bar Light
28408 8-1/2' Steel Cutting Edge (V)
96 8251
7-1/2'
SnoFoil
®
Assembly (RD)
26593 9-1/2' Steel Cutting Edge (V)
8252
8'
SnoFoil
®
Assembly (HD)
27362 9' Steel Cutting Edge (MC)
26880
8-1/2'
SnoFoil
®
Assembly (HD)
27239 10' Steel Cutting Edge – 2 Sections (MC)
8253
9'
SnoFoil
®
Assembly (HD)
99
27195 26" Flexible Blade Guide Set (LD, MC, V)
22380
9'
SnoFoil
®
Assembly (MC)
7906K Blade Guide Set (RD, HD)
22200
10'
SnoFoil
®
Assembly (MC)
26530K Commercial Blade Guide Set (All)
97 22470-1 7-1/2', 8', 8-1/2', & 9' Rubber Deflector
100
20043 Spring Replacement Tool
(LD, RD, HD)
101
26145 Shoe Kit (LD)
21619 8-1/2' Rubber Deflector (V)
102
20555 Skid Plate Kit
26572 9-1/2' Rubber Deflector (V)
ns
26812-1 Plow Parka
22390 9' & 10' Rubber Deflector (MC)
ns
5242
12 oz. Yellow Spray Paint (Painted Blades)
22269 6'-9" Steel Deflector (LD)
ns
20498 12 oz. Black Spray Paint (Powder-Coat)
283
7-1/2' Steel Deflector (LD, RD)
ns
27242 12 oz. Yellow Spray Paint (Powder-Coat)
26480 8' Steel Deflector (HD)
ns
5492Y 1 Quart Yellow Paint Can
26485 8-1/2' Steel Deflector (HD)
ns
5490Y 1 Gallon Yellow Paint Can
26490 9' Steel Deflector (HD, MC)
ns
28531 1 Quart EZ Flow Hydraulic Fluid
ns
28532 1 Gallon EZ Flow Hydraulic Fluid
B
LADES
Item
Part
Description
Item
Part
Description
60 –
6'-9"
Blade
3
(LD)
72
–
8-1/2' EZ-V
®
Blade
7-1/2' Blade
3
(LD)
–
9-1/2' EZ-V
®
Blade
61
22180 6'-9" Base Angle (LD)
73
21569 8-1/2' Blade Half – DS (V)
22181 7-1/2' Base Angle (LD)
26599 9-1/2' Blade Half – DS (V)
62
5523K 3/4 x 2-3/16 Machine Pin w/Cotter Pin
74
21570 8-1/2' Blade Half – PS (V)
63 –
–
7' L-Series Blade
3
(RD)
26600 9-1/2' Blade Half – PS (V)
–
7-1/2' L-Series Blade
3
(RD)
75
21564 8-1/2' Base Angle – DS (V)
–
8' L-Series Blade
3
(HD)
26597 9-1/2' Base Angle – DS (V)
–
8-1/2' L-Series Blade
3
(HD)
76
21565 8-1/2' Base Angle – PS (V)
–
–
9' L-Series Blade
3
(HD)
26598 9-1/2' Base Angle – PS (V)
64
7869
7' Base Angle (RD)
77
22260 1 OD x 4-3/4 Clevis Pin
7667
7-1/2' Base Angle (RD)
78
90601 1/4 x 1-1/2 Cotter Pin
7668
8' Base Angle (HD)
79
20790 Commercial Ram Pin
26885 8-1/2' Base Angle (HD)
80
90013 1/4 x 2 Cotter Pin
7669
9' Base Angle (HD)
81
21001 Center Deflector (bolted A-Frame)
65 –
9'
Blade
3
(MC)
21873 Center Deflector
10' Blade
3
(MC)
82
83
26858 Center
Flap
Kit
66
22369 9' Base Angle (MC
1
) 63508
Rubber
Flap
27259 9' Base Angle (MC
2
)
84
26523 6" Solid Cast Shoe Assembly (RD, HD, MC
2
, V)
20628 10' Two-Piece Base Angle – DS (MC
1
)
A5517 7" Anti-Wear Shoe Assembly (MC
1
)
20629 10' Two-Piece Base Angle – PS (MC
1
)
85
26464 Removable Spring Assembly
27240 10' One-Piece Base Angle (MC
2
)
(LD, RD, HD, 10' MC
2
)
67
20639K 3/4 x 3-15/32 Machine Pin w/Cotter Pin
1
21452 Removable Spring Assembly
7903K Anchor Pin w/Cotter Pin
2
(9' MC, 10' MC
1
, V)
68
5523K 3/4 x 2-3/16 Machine Pin w/Cotter Pin
1
86
20757 Removable Spring Bar (LD, RD, HD, 10' MC
2
)
27241 1 x 2-3/4 Clevis Pin w/Cotter Pin
2
21450 Removable Spring Bar (9' MC, 10' MC
1
, V)
69 20702
Angle
Frame
(MC
1
)
87
27406 Trip Spring (LD, RD, HD, 10' MC
2
)
27237
Angle
Frame
(MC
2
)
5323
Trip Spring (9' MC, 10' MC
1
, V)
70
90127 5/8-11 x 1-1/2 Hex Cap Screw G5
88
26656K Shoulder Bolt w/Locknut
71
91337 5/8-11 Hex Locknut GB
1
= Distinguished by a
3/4"
base angle pin and a
3/8"
Top Anchor; 10' blade has a
two-piece
base angle
2
= Distinguished by a
1"
base angle pin and a
1/2"
Top Anchor; 10' blade has a
one-piece
base angle
3
= Complete blade no longer manufactured.
G = grade
A-F
RAMES
Item
Part
Description
Item
Part
Description
30
22169 A-Frame w/Hardware (6'-9" LD)
41
20790 Commercial Ram Pin
22175 A-Frame w/Hardware (7-1/2' LD)
42
20988 V-Plow Pivot Pin
31
8562
A-Frame w/Hardware (RD – X = 22-1/2")
43
26463 1/4 x 2 Slotted Spring Pin
22168 A-Frame w/Hardware (HD – X = 22-1/2")
44
22260 1 OD x 4-3/4 Clevis Pin
8627
A-Frame w/Hardware (HD – X = 25-1/8")
45
26583 Blade Stop
32 20703-1 A-Frame Kit w/Hardware and Angle Frame
46 21484-1 Push Assembly
Guide (MC)
47
22161 A-Frame Stop Kit
33 21874-3 A-Frame (V)
48
7904K Clevis Pin w/Cotter Pin
34
22259 1 OD x 8-3/4 Pivot Pin
49
5150
1-1/4 x 4-7/8 Anchor Pin
35
90013 1/4 x 2 Cotter Pin
50
8229
Chain Bag (LD)
36
7903K Anchor Pin w/Cotter Pin
8565
Chain Bag (RD)
37
90601 1/4 x 1-1/2 Cotter Pin
8555
Chain Bag (HD, V)
38
7905K Pivot Pin w/Cotter Pin
21853 Chain Bag (MC)
39
20789 1-1/4 x 6-3/4 Commercial Pivot Pin
51
A6148K U-Bolt w/Hardware
40
20775 Commercial Angle Frame Guide
H
EADGEAR
Item
Part
Description
Item
Part
Description
1
21920 Lift Arm
7
8184
Jack Leg (6'-9" & 7-1/2' LD)
2
22341 Headgear (6'-9" LD)
20490 Jack Leg (RD/HD)
22090 Headgear (7-1/2' LD)
20491 Jack Leg (HD, MC, V)
8580
Headgear (RD/HD)
8
27164K Jack Handle Kit
8480
Headgear (HD)
9
8180
Jack Lever (6'-9" & 7-1/2' LD)
20758 Headgear (MC)
8499K Jack Lever (RD/HD, HD, MC, V)
21846 Headgear (V)
10
7794
1/2 OD x 2 Compression Spring
3
8514
Headgear Brace (RD/HD, HD, MC, V)
11
90658 5/32 x 1-1/4 Cotter Pin
4
20070 Lower Gear (6'-9" LD)
12
20185 Torsion Spring Kit
8561
Lower Gear (7-1/2' LD, RD/HD)
13
6920K Connecting Pin Kit
8533
Lower Gear (HD, V)
14
6815
Connecting Pin w/Handle
20759 Lower Gear (MC)
15
821
1 ID x 3-1/2 Compression Spring
5
8202
Release Rod (6'-9" & 7-1/2' LD)
16
8498
Bolting Bar (7-1/2' LD, RD/HD, HD, MC, V)
8551
Release Rod (RD/HD, HD, MC, V)
17
8741
Cable Boot Bracket
6
8183
Jack Support (6'-9" & 7-1/2' LD)
18
8284K Cable Boot
20487 Jack Support (RD/HD)
19
4289K 3/4 x 1-7/8 Machine Pin w/Cotter Pin
20488 Jack Support (HD, MC, V)
20
7904K Clevis Pin w/Cotter Pin
65
68
60
63
72
30
31
45
43
33
32
20
20
14
15
13
4
12
3
5
7
8
6
10
11
9
17
18
19
1
16
2
19
91
90
99
92
96
97
98
94
93
95
101
100
102
76
78
77
84
83
82
75
62
74
73
81
71
69
70
84
66
80
67
79
88
87
85
86
64
78
84
77
62
61
77
62
44
37
46
38
48
47
51
50
42
40
35
35
49
41
35
51
39
50
51
48
36
38
50
48
36
51
50
35
34
X
** RD headgear shown. LD, HD, MC, and V parts may look different. **
78
