manualshive.com logo in svg

Fisher LCP200, Инструкция по эксплуатации, Страница: 20 / 24

Поделиться
Скачать
Fisher LCP200 Скачать руководство пользователя страница 20

Instruction Manual

D104296X012

LCP200 Local Control Panel

August 2018

20

Parts Ordering

When corresponding with your 

Emerson sales office

 about this equipment, mention the serial number found on the

nameplate of the unit.

  WARNING

Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson may void
your warranty and hazardous area approval, might adversely affect the performance of the instrument, and could cause
personal injury and property damage.

Parts Kits

Kit Description

Part 

Number

1

LED Assemblies Kit (see figure 11) 

GG54645X012

 Includes LED module, qty. 1 (key 32); Lens cap, qty. 3,
  green, red, yellow (key 34, 35, 36); LED base O-ring, qty. 2
  (key 46); Socket cap screw, qty. 4 (key 45); O-ring, qty. 4 
  (key 47)

Note

The LED Assemblies Kit replaces one LED.

2

LED Blanking Kit (see figure 11)

GG54849X012

 Includes LED base O-ring, qty. 3 (key 46); Socket
  cap screw, qty. 12 (key 45); LED light cover, qty. 3, (key 33)

3

Soft Parts Kit (see figure 10)

GG54647X012

 Includes LED base O-ring, qty. 8 (key 46); Terminal O-ring, qty. 1
  (key 7); Panel O-ring, qty. 1 (key 44)

Kit Description

Part 

Number

4

Front Panel Assembly Kits (see figure 11)

Note

The Front Panel Assembly Kits contain LEDs and included buttons
pre-assembled on the front panel assembly (key 30). It also includes the
panel O-ring (key 44).

All Buttons included

GG54649X012

 Includes Flat head socket screw, qty. 6 (key 14); Front panel
   assembly, qty. 1 (key 30); Pushbutton O-ring, qty. 3 (key 40);
   Pushbutton, qty. 3 (key 38); Shroud, qty. 3 (key 39)

Reset & Trip Buttons included

GG54650X012

Reset & Test Buttons included

GG54651X012

Test & Trip Buttons included

GG54652X012

 Kits include Flat head socket screw, qty. 6 (key 14); Front panel
  assembly, qty. 1(key 30); Pushbutton O-ring, qty. 3 (key 40);
  Pushbutton, qty. 2 (key 38); Shroud, qty. 2 (Key 39); Blank
  pushbutton, qty. 1 (key 12, 304, 305)

Reset Button included

GG54653X012

Trip Button included

GG54654X012

Test Button included

GG54655X012

 Kits include Flat head socket screw, qty. 6 (key 14); Front panel
  assembly, qty. 1 (key 30); Pushbutton O-ring, qty 3 (key 40);
  Pushbutton, qty. 1 (key 38); Shroud, qty. 1 (key 39); Blank
  pushbutton, qty. 2 (key 12, 304, 305)

Содержание LCP200

























Отзывы:

Нет отзывов