25
Problems and Solutions
Problem
Probable Cause
Solution
Motor is not running; no swinging
Power is not on
Turn the power dial to one of six settings.
Batteries incorrectly installed
Remove the batteries and replace in correct
orientation, as indicated inside the battery
compartment.
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries or switch to AC power.
Motor is running but swinging stops after a
few minutes
Need to start swinging motion
To start swinging motion, give the seat a
light push.
Swing motion setting is inappropriate for
child’s weight
Adjust the power dial to a higher speed set-
ting and give the seat a light push.
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries or switch to AC power.
No difference noticed in swinging motion
after power dial is adjusted
Swing did not have sufficient time to adjust
to different setting
Allow the swing time to adjust to
new setting.
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries or switch to AC power.
Swinging motion too high even at the lowest
setting
Normal operation
To slow swinging motion, place one end of
a blanket underneath your child and let the
other end drape down while swinging.
Waterglobe (lights)/mobile, music/sounds
do not work and swing is off
Power dial is not on correct setting
Position the power dial to the position.
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Waterglobe (lights)/mobile, music/sounds
turn off automatically after seven minutes
Press the reset button
to restart water-
globe (lights)/mobile, music/sounds for
another seven minutes.
Music/sounds do not work (and power dial
is set to )
Music/sounds switch is in OFF position
Slide music/sounds switch to desired setting
.
Music/sounds turn off automatically after
seven minutes
Press the reset button
to restart music/
sounds for another seven minutes.
Waterglobe (lights) does not work (and
power dial is set to )
Mobile/waterglobe switch is in OFF posi-
tion or mobile only position
Slide mobile/waterglobe (lights) switch to
desired setting
.
Waterglobe (lights)/mobile turn off auto-
matically after seven minutes
Press the reset button
to restart water-
globe (lights)/mobile for another seven
minutes.
Mobile does not work (and power dial is set
to )
Mobile/waterglobe (lights) switch is in OFF
position or waterglobe only position
Slide mobile/waterglobe (lights) switch to
desired setting
.
Mobile/waterglobe (lights) turn off automati-
cally after seven minutes
Press the reset button
to restart
mobile/waterglobe (lights) for another
seven minutes.
