Battery
Installation
Battery Safety
Information
• For longer life, use
alkaline
batteries.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door.
• Insert three AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw.
• If this product begins to operate erratically,
you may need to reset the electronics. Slide
to the power switch off and back on.
• When sounds/lights become faint or stop, it’s
time for an adult to change the batteries.
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 3
AA (LR6)
• Protect the environment by not
disposing of this product or any
batteries with household waste. This
symbol indicates that this product
shall not be treated as household
waste. Check your local authority for
recycling advice and facilities.
