8
Consumer Information
Tips
• We recommend that this toy be used
outdoors.
• Do not use outdoors when it is raining
or there is wet grass. The balls will not
load properly.
• Be sure that when your child is batting,
there are no other children in or around the
batting area, including directly in front of
the toy.
• This toy is designed for use with soft balls
and plastic bat (both included). It is not
designed for use with wooden or metal bats,
or regulation baseballs or softballs. Use of
these balls and bats may damage this toy.
• Hold the bat with hands together, about one
or two inches (2,5 - 5 cm) from the knob at
the end of the bat.
- Right-handed batters should have the right
hand on top of the left hand.
- Left-handed batters should have the left
hand on top of the right hand.
• Stand with feet about shoulder width apart.
• Swing with a smooth and level motion.
Care
• Do not leave this product outdoors. Store
this product indoors when not in use.
• This product may be wiped clean using
a mild cleaning solution and a damp cloth.
Do not use bleach. Do not use harsh or
abrasive cleaners. Rinse clean with water
to remove residue. Do not immerse
this product.
• Periodically inspect this product for wear
and damage and replace any cracked parts.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/
TV technician for help.
NOTE:
Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
