8
Assembly
17
• Position the seat assembly so that the front of the seat is
toward the curved front base.
• While pressing the buttons on the swing tubes, insert them
into the frame hubs. Push the swing tubes up until the
buttons
“snap”
into the hole in the frame hubs.
• Push down on the seat to be sure the seat is secured in both
frame hubs.
Swing
Tube
Front
of Seat
Curved
Front
Base
Push
Button
Frame Hub
18
• Insert a #8 x 1
3
/
8
" screw into
each frame hub and tighten.
• Again, push down on the seat to be sure the seat is secured
to both frame hubs.
Frame
Hubs
#8 x 1
3
/
8
” Screw - 2
Shown Actual Size
19
• Fit the pocket on the back of the pad onto the seat back.
• Fit the waist belts through the smaller slots in the pad.
Waist Belts
Pad
20
• Lift the bottom of the pad.
• Insert the pad elastic loops through the holes in the
seat bottom.
• Insert the crotch belt through the slot in the pad.
• From under the seat, fit the elastic loops onto the tabs
on the seat bottom.
Pad
Elastic
Loops
Holes
Crotch
Belt
Seat Bottom
8
