66
7
7
• Push the front frame and rear frame toward each other.
• Press the push button on each joint and fit each joint into the
groove in each end of the rear frame.
Make sure both push
buttons “snap” into the hole in each end of the rear frame.
• Check to be sure the front and rear frames are assembled
correctly, by pulling them away from each other. The frames
should remain attached to each other.
Push Button
Rear Frame
Groove
Hole
Front Leg
(Underneath Pad)
A
A S
S S
S E
E M
M B
B L
L Y
Y
8
8
• Turn the hardboard over and
insert it into the pocket in the
bottom of the pad.
• Turn the seat face down.
• Fasten both pad buckles
together. Make sure you hear
a
“snap”
on both sides
Hardboard
Buckles