Keep this document handy for easy reference.
●
For detailed information on the features of your oven, see your ‘User guide’.
●
Before using your oven, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.
●
For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service &
warranty’ booklet.
YOUR OVEN
THE CONTROL PANEL
SETTING THE CLOCK
CONDITION BOTH OVENS
OB76SDDEPX
1
Control panel
PER
OVEN
2
Oven vent louvres
3
Oven light
4
Telescopic sliding shelf (x3)
5
Side rack
6
Oven door and handle
7
Oven seal
Accessories:
8
Meat probe
9
Flat baking tray
!0
Rack
!1
Grid
!2
Pan
8
9
10
11
12
2
3
4
5
7
6
1
Locking the control panel
●
To lock, press and hold the
select
button until the
control lock indicator
comes
on.
●
To unlock, press and hold the
cancel
button until the
indicator
flashes and then
goes out.
Control lock indicator
(see ‘Locking the control panel’)
if lit:
Control panel is locked
Timer indicator
(see ‘Using the timer’)
if lit:
Timer is
counting down
Close door indicator
if lit:
Door is open when oven is on
(some functions only). See
‘Troubleshooting’ in your User guide.
Cooking time indicator
(see ‘Automatic cooking’) in
User guide
if lit:
Automatic cooking time is set
Meat probe indicator
(see ‘Using the meat probe’) in
User guide
if lit:
Meat probe is in use
(display will alternate between
probe set temperature and internal
temperature of the meat)
Stop time indicator
(see ‘Automatic cooking’) in User
guide
if lit:
Automatic stop time is set
Display
Scroll
Select
Cancel
NZ AU
BUILT-IN OVEN
QUICK START GUIDE
You set the clock within the user preference menu. To learn more about the user preference menu, refer to your User guide.
Note: If you do not wish to set the time initially when the oven is first switched on at the wall, press the cancel
button to exit the clock
setting. If you want to set the clock later, follow the steps under ‘To change the time’.
To change the time
(within the user preference menu)
When the oven is first switched on at the wall
1
Press and hold the left and right
scroll
buttons together
for 3 seconds to enter the user
preference menu.
●
The display will either show 12 Hr
or 24 Hr
2
Press the select
button to
confirm. The display will flash.
3
Follow steps 2-5 left to set the
time.
●
At step 2a, you also now have the
ability to scroll between 24 Hr, 12
Hr and OFF (turns the display off).
●
Refer to the User guide to learn
more about this feature.
3
Press the left and right scroll
buttons to set the time.
1
The display will flash 24 Hr.
4
Press the select
button to
confirm.
2
Press the right scroll
button to
scroll between 24 Hr and 12 Hr.
Press the select
button to
confirm.
continued over
UPPER
LOWER
Fan
Bake
Fan
Forced
Classic
Bake
Fan
Grill
Maxi
Grill
Fan
Bake
Fan
Forced
Classic
Bake
Fan
Grill
Maxi
Grill
Upper Oven Function indicators
(see ‘Oven functions’)
Lower Oven Function indicators
(see ‘Oven functions’)
Function dial
Upper Oven
sealector button
Lower Oven
selector button
Upper oven
Temperature
indicator
Lower oven
Temperature
indicator
Temperature
dial
Function halo
Temperature
halo
Upper oven
Lower oven
Upper Oven indicator
if lit:
Oven is on
Lower Oven indicator
if lit:
Oven is on
It is important that you condition the oven before using it for cooking and baking. Conditioning will burn off any manufacturing
residue and ensure you get the best results from the start. You can condition both ovens at the same time. Follow the steps below.
There will be a distinctive smell and a small amount of smoke during conditioning. This is normal, but make sure the kitchen is well
ventilated.
1
Make sure you have removed any packaging and any cable ties used to secure the shelving during transit.
2
Make sure you have set the clock.
3
Make sure all the shelves are fitted.
UPPER
LOWER
N
O
I
T
C
N
U
F
N
O
I
T
C
N
U
F
E
R
U
T
A
R
E
P
M
E
T
E
R
U
T
A
R
E
P
M
E
T
E
R
U
T
A
R
E
P
M
E
T
E
R
U
T
A
R
E
P
M
E
T
5
Select the Bake function.
●
The halo will glow white.
●
Each function has a
preset temperature and
so the oven will start
heating at the Bake preset
temperature of 180
o
C.
8
Select the Bake function.
●
The halo will glow white.
●
Each function has a
preset temperature and
so the oven will start
heating at the Bake preset
temperature of 180
o
C.
4
Press the UPPER oven
selector button
●
The upper row of function
indicators will glow.
●
The halo around the selector
button will glow red.
6
Set the temperature to 200
o
C for 30 minutes.
●
While the oven is heating up, the temperature
halo will glow red and the temperature indicator
will alternately show the actual and set
temperatures.
●
When the oven has reached set temperature, a
tone will sound and the halo will turn white.
9
Set the temperature to 200
o
C for 30 minutes.
●
While the oven is heating up, the temperature
halo will glow red and the temperature indicator
will alternately show the actual and set
temperatures.
●
When the oven has reached set temperature, a
tone will sound and the halo will turn white.
UPPER
LOWER
7
Press the LOWER oven function button
●
The lower row of function indicators will
glow
●
The Bake indicator on the top row will
continue to glow red, but the rest of the
indicators will go out.
