Страница 1: ...he Use Care Book and Installation Instructions INSTALLATION REQUIREMENTS LOCATION Washer must be installed on firm flooring to minimize vibration during spin cycles Concrete flooring is best but wood base is sufficient providing floor support meets FHA standards Washer should not be installed on rugs or exposed to the weather PLUMBING Water Temperature Your cold water should not exceed 95 F 35 C o...
Страница 2: ...nt press cycle 7 Open lid and check the washer basket to see that it sits slightly forward of centre see illustration INCORRECTADJUSTMENT CORRECT ADJUSTMENT 8 Close the lid Visually check that the lid and topdeck are aligned If it does not look like the diagram below adjust one of the front feet slightly until it matches Lid Alignment lid SPECIAL REQUIREMENTS FOR ALCOVE OR CLOSET INSTALLATION The ...
