Fisher & Paykel DISHDRAWER DD60SHI9, Руководство по установке

Страница: 10 / 20

10
CABINETRY PREPARATION
SERVICE ACCESS
SERVICE HOLE DIMENSIONS MM
A
Maximum distance between rear of cavity and service hole 5
B
Maximum distance between shelf* and service hole 10
C
Minimum diameter of service hole 57
D
If venting through the adjacent cabinetry, the rear edge of the service hole should be
enlarged by cutting out the bottom corner
*For assisted opening installations, maximum distance should be referenced from the top of the spacer blocks
REAR
WALL
SHELF*
PROFILE
A
B
C
D
z
Service holes can be created on either side of the DishDrawer™ Dishwasher cavity as
shown below.
z
If the hole is created through wood, ensure the edges are smooth and rounded.
z
If the hole is created through metal, ensure the edge protector is fitted.
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
1
MOISTURE PROTECTION
10mm
SIDE PARTITION
SELECT CABINETRY SECURING METHOD
1
If securing via the drawer removal method,
ensure the marked locations provide
adequate support.
If there are no side partitions, construct timber
bracing to secure the fixings to.
Recommended method*
*Frameless cabinetry only
METHOD A
Secure to cabinetry via brackets
METHOD B
Secure via drawer removal