Fisher & Paykel DISHDRAWER DD60DTX6HI, Руководство по установке

Страница: 10 / 20

10
PREPARATION
SERVICE ACCESS
REAR
WALL
Hole
location
created
to suit
cabinetry
REAR
WALL
INSIDE
WALL
FLOOR
PLAN
PROFILE
SERVICE HOLE DIMENSIONS MM
A
Maximum distance between rear of cavity and service hole 5
B
Maximum distance between floor and service hole 10
C
Minimum diameter of service hole 57
A
B
C
C
z
We recommend locating the service holes on either side of the DishDrawer™ Dishwasher as
shown below.
z
If the holes are created through wood, ensure the edges are smooth and rounded
z
If the holes are created through metal, ensure the supplied edge protector is fitted.
1
MOISTURE PROTECTION
10mm
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
For best results, we recommend installing the supplied sound seal to reduce the possibility of
any excess noise occurring during daily use.
SOUND SEAL (OPTIONAL)
1
2
Cavity height of 864 – 874mm
Lay the sound seal flat, do not fold.
Cavity height of 874mm +
Fold the sound seal as illustrated.
Gently tilt the DishDrawer™ Dishwasher
back and align the seal to the front feet.
Carefully lower product and ensure seal
is still positioned correctly.