18
ADJUSTING THE HEIGHT
Open the drawer fully, and slightly
loosen the two screws.
1
2
3
Adjust to the required height and then
re-tighten the screws. The height is
adjustable within 5mm.
Close the drawer and check the
alignment. Adjust again if necessary.
The front panel of the drawer can be adjusted vertically to align with the surrounding
cabinetry.
ADJUSTING THE DEPTH
Open the drawer fully.
Using a hex key, turn the adjustment
screw to move the front panel forward.
Turn clockwise to move backwards or
counterclockwise to move forwards.
1
2
The depth is adjustable within
3/16" (4mm).
Applicable for 30" Vacuum seal drawer only. The depth of the front panel of the drawer can be
adjusted to align with the surrounding cabinetry.
Содержание CONTEMPORARY VB24SDEX1
Страница 2: ......