Getting Started Quickly
AeroCare DE7027P, DG7027P
• Ensure the lint filter has been cleaned before each drying cycle. Check the lint filter has been replaced correctly
in its housing before using your dryer.
• Sort and load items into the dryer drum. Ensure that no items are caught in the way of the door, then close the
door. Check the door is fully closed before starting the dryer.
Ensure there is plenty of room for the garments to tumble freely while drying – do not overload your
dryer. Load in terms of the space clothes take up when dry rather than when they are wet.
1. Press POWER to activate your dryer.
2. Your dryer will default to the REGULAR cycle. Select your desired drying cycle by turning the
SmartTouch
TM
Control Dial.
3. Select your preferred drying options (if you wish to select different options from the default options programmed
for the cycle) using the
SmartTouch
TM buttons on the right hand side of the panel.
4. Touch the START/PAUSE button to start the drying cycle.
Fig.45 AeroCare control panel (DE7027P, DG7027P)
Updated: Sat, 13 Nov 2021 02:37:23 GMT
Powered by
1
