Fisher & Paykel 80701, Руководство по обслуживанию, Страница: 5 / 16

590125
5
1 HEALTH & SAFETY
When servicing the Range Hood, Health & Safety issues must be considered at all times. Specific
safety issues are listed below with the appropriate icon.
Electrical Safety
Ensure the mains power has been disconnected before servicing the
Appliance.
If the mains supply is required to be on to service the Appliance, make
sure it is turned off when removing any electrical component or connection
to avoid electric shock.
Electrostatic Discharge
An anti-static strap is to be used as electrical static discharge (ESD)
protection when servicing electronic components.
Good Working practices
Ensure the work area is in a tidy and orderly condition at all times so as
not to cause a hazard while service work is being completed. Always clean
and tidy the Appliance and work area after service is completed.
Insulation test
Megger test to check insulation
Warning: short together the phase and neutral pins on the plug so not to
damage any electronic circuitry.
Sharp Metal Edges
When working around cut sheet metal edges, use appropriate gloves or
protection to eliminate the change of receiving a laceration.