FISCHER FISCHERSCOPE X-RAY 5000 Series, Руководство оператора, Страница: 128 / 188

128 FISCHERSCOPE
®
X-RAY
Measurement Data Export Setting up an Export Template
17.3 Setting up an Export Template
The format in which measurement data and other data is written to a file during data export
is specified in an export template. With the export template you control, which data is
exported and the layout, into which the data is exported.
An export template can be assigned to one or several products. For each product you can
set up a specific export template.
Procedure
Do one of the following:

To create a new export template select Evaluation > Export > new template .
The window New export template appears.
In the field Name enter a name for the new export template and click OK .

To modify an existing export template select
Evaluation > Export > modify template .
The window Select export template appears.
Select the template you want to change and click OK .
to Excel The data will be directly sent to an Excel file.
A new Excel workbook (Workbook 1) opens with the first exported
value. Even if Excel is already opened, a new workbook will open
with the first exported value. In the field
Startposition Column
Row enter the cell, where the table shall start, e.g. C4 .
@TAB must be inserted in the export template as column
separators. In addition, a period (.) and not a comma (,) must be
selected as the decimal character. Depending on the country
setting, Excel might still display the comma (,) as the decimal
separator character. At the end, the Excel workbook (Workbook 1)
must be saved.
► Do not close Excel as long as WinFTM is still open.
to OPC-DA1..3 For the connection of the PC to a programmable logic control via
Profibus, Profinet
to TCP-IP For the connection of the PC via TCP/IP
Table 17-2: Explanation of the controls of the Exporting data window
Control Explanation